Our Store

Everything you need to prototype with Voltera V-One

Voltera V-One Consumables Accessories

photo of Voltera V-One

Voltera V-One

$2,199.00

The Voltera V­-One brings quick turn PCBs to your desktop. Import your gerber file into the Voltera software, press print, and the V-­One will bring your board to life. Use the solder paste dispensing and reflow features to mount components onto your printed board, or mount components on a pre­fabricated board with ease.

The V­-One includes:

1 – Voltera V­-One
1 – Conductive ink cartridge
1 – Solder paste cartridge
2 – Dispensing units
1 – Probe
3 – Dispensing unit caps
4 – Dispensing tips
Clamps
Thumbscrews
1 – Pre-­solder burnishing pad
10 – 2” x 3” FR4 substrates
6 – 3” x 4” FR4 substrates
1 – Tube of solder wire
1 – Hello World starter kit


NOTE: Orders that come in now have a lead time of approximately 6-8 weeks until shipping.

Ready to checkout?

Consumables

Keep on printing

photo of 2” x 3” substrates

2” x 3” substrates

$11.99

Pack of 10 blank 2” x 3” FR­4 boards are ready for printing your circuitry on. Just clamp them to the printing platform and press print to dispense the ink.

photo of 3” x 4” substrates

3” x 4” substrates

$11.99

Pack of 6 blank 3” x 4” FR­4 boards are ready for printing your circuitry on. Just clamp them to the printing platform and press print to dispense the ink.

photo of Burnishing Pad

Burnishing Pad

$8.99

Pack of three

After your circuit is printed and cured, the silver traces need a quick burnishing step to remove organic matter. The burnishing pad contains micro­pores that can remove even the smallest contaminants. Just give the board a scrub and watch the traces turn silver.

photo of Conductive Ink Cartridge

Conductive Ink Cartridge

$99.99

The key to printing a circuit board with the V­-One is in the ink. The printer lays down silver nanoparticle ink as the traces and pads that comprise your board. After thermal curing, the ink is conductive and ready for reflow. 

Each cartridge prints approximately 85 simple boards.

Cartridges must be kept refrigerated, and have a shelf life of 6 months.

1 x 2mL cartridge

photo of Hello World Component Kit

Hello World Component Kit

$5.99

The Hello World circuit is the first circuit you print with your V-One. Have more than one person using your V-One? Then you might want more Hello World kits!

The Hello World kit contains:

6 x Green LEDs
3 x 47k Resistors
3 x 180R Resistors
3 x 100k Resistors
3 x 4.7UF Capacitor
1 x 555 timer
1 x 9V battery

photo of Nozzles

Nozzles

$49.99

Keep printing with a pack of 4 nozzles. These dispensing tips are required for accurate deposition of ink and solder paste.
photo of Solder Paste Cartridge

Solder Paste Cartridge

$49.99

Fed up with ordering multiple stencils in between board iterations? Just snap on the solder paste cartridge and the V-­One will dispense solder paste onto the pads of your board. Solder paste can be dispensed onto your V­-One printed boards, or pre­fabricated circuit boards.

Each cartridge prints approximately 11,000 0603 pads.

Cartridges must be kept refrigerated, and have a shelf life of 6 months.

1 x 2mL cartridge

photo of Solder Wire & Flux

Solder Wire & Flux

$19.99

Done printing? Let’s add some components! Just be sure to use the Voltera recommended solder wire and plenty of flux to ensure a strong solder joint. We’ve chemically tested it to be most compatible with our nanoparticle ink.

Ready to checkout?

Accessories

photo of Thumbscrews

Thumbscrews

$11.99

Pack of 4 thumbscrews attach board clamps to the V­-One printing platform and ensure your board is securely mounted. Be sure to get them here should you need replacements.

Ready to checkout?

Voltera Merch

photo of Building Hardware Sucks T-Shirt

Building Hardware Sucks T-Shirt

$25.00

Ultra soft and slim-fitting t-shirt.

• PolyCotton (50% Polyester / 50% Combed Cotton) construction
• Unisex size – women may prefer to order one size smaller

photo of Electronics Workbench T-shirt

Electronics Workbench T-shirt

$25.00

Ultra soft and slim-fitting t-shirt.

• PolyCotton (50% Polyester / 50% Combed Cotton) construction
• Unisex size – women may prefer to order one size smaller

photo of Voltera Reference Rulers

Voltera Reference Rulers

$14.99

A handy reference for any PCB designer that reminds you of all those standard package and trace sizes. We know there are too many to remember!

Icon Close
Icon Close
Icon Close